Which fenders are made in usa

While an American Fender has a three piece body made of ash, its Mexican equivalent is made either superior choice in wood and build. Another pretty significant difference that should interest you is the number of frets on each. While the Mexican variety comes with 21 frets the American Fender tops it with Taking a look at the inside of a typical Mexican and American Fender electric guitar will also show you that some other interesting variations as well. The inside cavity of a Mexican Fender comes with one humbucking or two single coil routers.

And speaking of necks, while a Mexican Fender comes with a standard four bolt, an American Fender comes equipped with a four bolt micro tilt that allows for more string adjustments. So essentially, the neck on a Mexican Fender — truss rod and all — simply does not allow for as many modifications as the American variety. As far as looks go — and while they honestly do look very much the same to the naked eye — the body of a Mexican Fender has a polyester finish while an American Fender the again superior polyurethane body finish.

So with that said, the difference among these finishes is pretty much the cost of the material and their inherent qualities but rest assured that it should not make a difference as far as sound goes. And finally, both Fenders come in a Synchronized Tremolo style but the American fenders have stainless steel saddles — not much of a difference as far as performance but again, a marked improvement over the Mexican Fender as far as quality in materials goes.

I guess it was only a matter of time before it happened. No more Made in U. Now it's "Made in too-many-places-to-list-and-some-we'd-rather-not-tell-you". Hang onto your MIA Fenders everyone! Especially when all Fenders are made of synthetics According to another thread, every species of wood that most often goes into a guitar is eventually getting protected status and placed on the CITES endangered list.

I'm not surprised to hear it, though. I've been expecting that for a while now. The world's goin' to hell in a bucket, I tells ya. Alex Najarian Senior Member. Messages 1, Well, I am about all stocked up on guitars, as much as I need to be and I think most other members here can say the same thing. DakotaRed Silver Supporting Member. Why do I have the urge to check Twitter? I wonder if its the hardware that has changed manufacturing to other countries?

Or are some of the key components body, neck now being at least partially manufactured outside the US? Or, maybe none of the manufacturing processes have actually changed, but Fender is just now getting in compliance with the "Made in USA" laws. Tim Plains Member. Messages 6, I'm glad to read they went with a fuller neck on these. Maybe they went with Corona, CA, just to differentiate that it's a new model? Just a thought. DrewH Member.

Messages 2, California has strict laws now on what you can stamp "made in the USA". Is is an unreasonable percentage of the product. Music man also had to take it off their guitars. But, pots, fretwire, tremolos, plastic parts, etc are being made in different parts of the world. This is strictly a Cali thing and its new.

They are more than likely made exactly as they were before. Choose from three colors including Inca Silver. It's got all the appointments needed to get the job done, executed in a way that caters to the modern musician while capturing the ethos of Leo Fender's original design.

Vintage pickups combined with modern wiring options provide a range of tonal possibilities further expanded by the S-1 switch which blends the neck pickup into any switch position. Body contours, a tapered neck heel and rolled fingerboard edges make this guitar as comfortable to play as it is functional. The "Modern D" neck profile with satin finish and 10" - 14" compound radius are perfect for those looking for a "fast" neck for soloing and leads.

The Ultra is available in seven colors including Plasma Red Burst and the increasingly popular Texas Tea which changes colors in the light. The hollow body means this guitar sounds great plugged into an amp on stage or in your lap. The top is made of spruce, which is a common choice for acoustic guitars due to its resonance. The "Mod Knob" gives you control of these 10 voices by giving you the option to switch between or blend 2 distinct models available in each of 5 positions.

Here is a quick summary of the tones offered:. Learn more about the American Acoustasonic Series Stratocaster here. While all Fender guitars are held to an extremely high standard of quality for component parts, fit and finish, some models include advanced features that can make the cost jump. Features like a rosewood fingerboard or innovations like the pop-in tremolo arm, locking tuning and body contouring will also make the cost of any instrument rise.

Due to variations in the density of wood and the structure of various components, no two Stratocasters—even from the same series—are likely to weigh exactly the same. And no two Strats from the same series that weigh the same may not sound the same.

That said, almost all of the Strats featured here fall somewhere between seven and nine pounds, with the majority in the meaty middle of that range. People with smaller builds may prefer an instrument on the lighter side, while a lighter guitar doesn't feel substantial enough for others. Woe to the southpaw player. Always searching for guitars only to find that left-handed options aren't available.

More left-handed guitars here. Skip to main content. By Ben Nemeroff. Time to get acquainted with the basics and then browse 8 models with Fender Insiders Anatomy of a Stratocaster Stratocaster Bodies Modern Stratocaster bodies are still made of the same woods the originals were made from over 60 years ago: alder and ash. Alder The alder used in most Fender guitars boasts many sonic advantages. Ash Ash can be difficult to work with.

Stratocaster Necks This is one place where each of the seven Strat models compared here differ from one another, though most are Neck Shape Fender offers guitars with a handful of different neck profiles, but the guitars included here feature variations on the classic "C"-shaped neck, which has a more rounded profile than the pointed "V" or flatter "U" style. Fingerboard Radius The fingerboard radius is the measure of the arc of the fingerboard across its width.

Fret Sizes Fret size refers to the actual fret wire used to create the frets. Fret Sizes Explained "How many frets are on a Stratocaster?